# TEILE

A02:
clamp without positive stop for sensors D=3mm

WebDescription:
clamp without positive stop for sensors D=3mm


A02:
clamp without positive stop for sensors D=4mm

WebDescription:
clamp without positive stop for sensors D=4mm


A02:
clamp without positive stop for sensors D=5mm

WebDescription:
clamp without positive stop for sensors D=5mm


A02:
Bracket with positive stop for sensors M5 with thread length 23mm

S01:
The switching distance of the proximity switches may change by use of the positive stop.

WebDescription:
Bracket with positive stop for sensors M5 with thread length 23mm


A02:
clamp without positive stop for sensors D=6.5mm

WebDescription:
clamp without positive stop for sensors D=6.5mm


A02:
clamp without positive stop for sensors D=8mm

WebDescription:
clamp without positive stop for sensors D=8mm


A02:
clamp with positive stop for sensors D=8mm

WebDescription:
clamp with positive stop for sensors D=8mm


A02:
clamp with positive stop for sensors with diameter 8mm

WebDescription:
clamp with positive stop for sensors with diameter 8mm


A02:
Bracket with positive stop for sensors M8 with thread length 40mm or longer

WebDescription:
Bracket with positive stop for sensors M8 with thread length 40mm or longer


A02:
Bracket with positive stop for sensors M8 with thread length 45mm, weld-immune

WebDescription:
Bracket with positive stop for sensors M18 with thread length 30mm, weld-immune


A02:
Bracket with positive stop for sensors M8 with thread length 30mm

WebDescription:
Bracket with positive stop for sensors M8 with thread length 30mm


A02:
Bracket with positive stop for sensors M8 with thread length 30mm, weld-immune

WebDescription:
Bracket with positive stop for sensors M8 with thread length 30mm, weld-immune


A02:
Prox mount with positive stop for sensors M8 in sealed Installation

WebDescription:
Prox mount with positive stop for sensors M8 in sealed Installation


A02:
Bracket with positive stop for sensors M8

S01:
The switching distance of the proximity switches may change by use of the positive stop

WebDescription:
Bracket with positive stop for sensors M8, M12x30, brass


A02:
for sealing of high pressure resistant sensors M8

M02:
Strength class 8, DIN 267, sealing ring PA11

WebDescription:
seal nut for sealing of high pressure resistant sensors M8


A02:
In combination with clamping cuff BES 08-FA-BS...

WebDescription:
Positive stop in combination with clamping cuff BES 08-FA-BS...


WebDescription:
positive stop in combination with clamping cuff BES 08-FA-BS...


A02:
In combination with positive stop BES 08-FA..

WebDescription:
Clamping cuff, straight In combination with positive stop BES 08-FA..


WebDescription:
positive stop clamping cuff right angle for sensors with diameter 4mm


WebDescription:
positive stop clamping cuff right angle for sensors with diameter 8mm


S01:
The rated switching distance of the proximity switches is reduced by 1mm when the cover nut is threaded on.


WebDescription:
clamping cuff for round sensors D=11,9mm


A02:
clamp without positive stop for sensors M12 non-flush

WebDescription:
clamp without positive stop for sensors M12mm non-flush


A02:
clamp with positive stop for sensors M12 flush

WebDescription:
clamp with positive stop for sensors M12 flush


A02:
clamp with positive stop for vertical insertion of sensors M12

WebDescription:
clamp with positive stop for vertical insertion of sensors M12


A02:
clamp with positive stop for horizontal insertion of sensors M12

WebDescription:
clamp with positive stop for horizontal insertion of sensors M12


A02:
clamp with positive stop for sensors M12mm

WebDescription:
clamp with positive stop for sensors M12mm


A02:
clamp with positive stop for sensors M12mm, locking mechanism

WebDescription:
clamp with positive stop for sensors M12mm, locking mechanism


A02:
Clamp for holding inductive proximity switches in cylindericalhousings M12 flush mount

WebDescription:
Clamp for holding inductive proximity switches in cylindericalhousings M12 flush mount


A02:
Bracket with positive stop for sensors M12 with thread length 40mm or longer

WebDescription:
Bracket with positive stop for sensors M12 with thread length 40mm or longer


A02:
Bracket with positive stop for sensors M12 with thread length 40mm, weld-immune

WebDescription:
Bracket with positive stop for sensors M12 with thread length 40mm, weld-immune


A02:
Bracket with positive stop for sensors M12 with thread length 30mm

WebDescription:
Bracket with positive stop for sensors M12 with thread length 30mm


A02:
Bracket with positive stop for sensors M12 with thread length 30mm, weld-immune

WebDescription:
Bracket with positive stop for sensors M12 with thread length 30mm, weld-immune


A02:
with positive stop for sensors M12 in sealed Installation

WebDescription:
Prox mount with positive stop for sensors M12 in sealed Installation


A02:
Bracket without positive stop for sensors M12

WebDescription:
Bracket without positive stop for sensors M12, M16x1x30,5, brass


A02:
Bracket with positive stop for sensors M12

WebDescription:
Bracket with positive stop for sensors M12, M16x1x30,5, brass


S01:
The switching distance of the proximity switches reduced are on 0,8 mm

WebDescription:
Bracket with positive stop for sensors M12, M16x1x38, brass


A02:
In combination with clamp BES 08-FABS...

WebDescription:
positive stop in combination with clamp BES 08-FABS...


A02:
Angle bracket for Sensors M12 and for Brackets e.g. BES 8.0-KH-2...


WebDescription:
clamping cuff for round Sensors D=14,5mm


A02:
Angle bracket for Sensors M16 and for Brackets e.g. BES 12.0-KH-2...

WebDescription:
Angle bracket for Sensors M16, Aluminium 30x40x40


A02:
clamping cuff for mounting inductive proximity switches with M18mm tubular housing

WebDescription:
clamping cuff for mounting inductive proximity switches with M18mm tubular housing


A02:
clamp without positive stop for sensors M18 non-flush

WebDescription:
clamp without positive stop for sensors M18 non-flush


A02:
clamp with positive stop for sensors M18 flush

WebDescription:
clamp with positive stop for sensors M18 flush


A02:
clamp with positive stop for vertical insertion of sensors M18

WebDescription:
clamp with positive stop for vertical insertion of sensors M18


A02:
clamp with positive stop for horizontal insertion of sensors M18

WebDescription:
clamp with positive stop for horizontal insertion of sensors M18


A02:
clamp with positive stop for sensors M18mm

WebDescription:
clamp with positive stop for sensors M18mm


A02:
Bracket with positive stop for sensors M18 with thread length 40mm or longer

WebDescription:
Bracket with positive stop for sensors M18 with thread length 40mm or longer


A02:
Bracket with positive stop for sensors M18 with thread length 50mm, weld-immune

WebDescription:
Bracket with positive stop for sensors M18 with thread length 50mm, weld-immune


A02:
Bracket with positive stop for sensors M18 with thread length 45mm

WebDescription:
Bracket with positive stop for sensors M18 with thread length 45mm


A02:
Bracket with positive stop for sensors M18 with thread length 30mm

WebDescription:
Bracket with positive stop for sensors M18 with thread length 30mm


A02:
Bracket with positive stop for sensors M18 with thread length 30mm, weld-immune


A02:
Prox mount with positive stop for sensors M18 in sealed Installation

WebDescription:
Prox mount with positive stop for sensors M18 in sealed Installation


A02:
Bracket without positive stop for sensors M18

WebDescription:
Bracket without positive stop for sensors M18, M24x1,5x36, brass


A02:
Bracket with positive stop for sensors M18

WebDescription:
Bracket with positive stop for sensors M18, M24x1,5x36, brass


A05:
Pressure rated up to 13 bar when correctly installed.

S01:
Pressure rated up to 13 bar when correctly installed.


WebDescription:
angle bracket for sensors M24, Aluminium, 35x40x50


A02:
clamp with positive stop for sensors M30 flush

WebDescription:
clamp with positive stop for sensors M30 flush, plastic


A02:
clamp with positive stop for sensors M30

WebDescription:
clamp with positive stop for sensors M30


A02:
clamp with positive stop for sensors M30mm, locking mechanism

WebDescription:
clamp with positive stop for sensors M30mm, locking mechanism


A02:
Bracket with positive stop for sensors M30 with thread length 40mm or longer

WebDescription:
Bracket with positive stop for sensors M30 with thread length 40mm or longer


A02:
Bracket with positive stop for sensors M30 with thread length 50mm, weld-immune

WebDescription:
Bracket with positive stop for sensors M30 with thread length 50mm, weld-immune


A02:
Bracket with positive stop for sensors M30 with thread length 30mm

WebDescription:
Bracket with positive stop for sensors M30 with thread length 30mm


A02:
Bracket with positive stop for sensors M30 with thread length 30mm, weld-immune

WebDescription:
Bracket with positive stop for sensors M30 with thread length 30mm, weld-immune


A02:
Bracket without positive stop for sensors M30

WebDescription:
Bracket without positive stop for sensors M30, M36x1,5x40, brass


A02:
Bracket with positive stop for sensors M30

WebDescription:
Bracket with positive stop for sensors M30, M36x1,5x40, brass


A02:
Angle bracket for Brakets e.g. BES 30.0-KH-2...

WebDescription:
Angle bracket for Brakets e.g. BES 30.0-KH-2...


WebDescription:
Mounting system on unicompact, with e.g. Fa. Helm roller rail profile no. 100, Aluminium


M07:
screw DIN 912 M5 galvanized,washer DIN 433, D 5.3

WebDescription:
Mounting system on unicompact, with e.g. Springob C30, 16mm, Aluminium


A02:
Mounting bracket for sensors Q40 Unicompact

WebDescription:
angle bracket for sensors Q40 Unicompact, 35x61x6, Aluminium


WebDescription:
Mounting bracket for sensors Q40 Unicompact, 40x40x25, Aluminium


WebDescription:
Unicompact Mounting bracket for sensors Q40 Unicompact, 40x40x22, Aluminium


WebDescription:
Weld protector for Unicompact, 41,4x40x85


A01:
Mounting Bracket provides to fastening sensores BES R04KC

WebDescription:
Mounting Bracket provides to fastening sensores BES R04KC, 16x9x4


WebDescription:
lens, with Fiberoptics and BFO-D22-LA-BC-10


WebDescription:
Holder for mounting of fiber optics with D=8mm


WebDescription:
Fiber optic straight, thru beam In combination with diffuse sensors


WebDescription:
Fiber optic straight, thru beam in combination with diffuse sensors M18


WebDescription:
fiber optic straight, thru beam in combination with diffuse sensors M18


WebDescription:
Fiberoptic straight, thru beam in combination with diffuse sensors M18


WebDescription:
Fiberoptic right angle, thru beam in combination with diffuse sensors M18


WebDescription:
Fiberoptic right angle, thru beam in combination with diffuse sensorsM18


WebDescription:
Fiberoptic straight, thru beam in combination with diffuse sensorsM18


WebDescription:
Fiberoptic straight in combination with diffuse sensorsM18


WebDescription:
Fiberoptic right angle in combination with diffuse sensorsM18


WebDescription:
Fiberoptic right angle in combination with diffuse sensors M18


WebDescription:
Fiberoptic straight in combination with diffuse sensors


A02:
In combination with diffuse sensorBOS M18-PU-...

WebDescription:
Fiberoptic straight, thru beam in combination with diffuse sensorBOS M18-PU-...


WebDescription:
Fiberoptic right angle, thru beam in combination with diffuse sensorBOS M18-PU-...


WebDescription:
Fiberoptic straight In combination with diffuse sensorBOS M18-PU-...


WebDescription:
Fiberoptic right angle in combination with diffuse sensorBOS M18-PU-...


A02:
Fiberoptic BFO 18V.. on diffuse sensor BOS 30M..

WebDescription:
Adapter for Fiberoptic BFO 18V.. on diffuse sensor BOS 30M..


S01:
operating distance refers to BOS 74K-UU-1FR-BO-Z

WebDescription:
Fiber optic straight, with BOS 15K.., BOS 20K.., BOS 74K..


WebDescription:
Fiber optic straight, thru beam with BOS 15K.., BOS 20K.., BOS 74K..


S01:
operating distance refers to Kodak gray card 90% and BOS 74K-UU-1FR-BO-Z

WebDescription:
Fiber optic straight with BOS 15K.., BOS 20K.., BOS 74K..


WebDescription:
Fiber optic straight, flexible optohead, with BOS 15K.., BOS 20K.., BOS 74K..


WebDescription:
Fiberoptic right angle on BOS 15K.., BOS 20K.., BOS 74K..


A02:
Plastic-Fiber optics with Ï1.0mm to Ï2.2mm

WebDescription:
Adapter, plastic-fiber optics with Ï1.0mm to Ï2.2mm


WebDescription:
90░- end fitting with fiber optics BFO D22-LD-EAK-10-20


WebDescription:
End fitting without lens with fiber optic BFO D22-LD-EAK-10-20


WebDescription:
Duplex fiber optic on BOS 15K.., BOS 20K.., BOS 74K..


WebDescription:
Fiberoptic straight with BOS 15K.., BOS 20K.., BOS 74K..


WebDescription:
Fiber Optics straight with BOS 15K.., BOS 20K.., BOS 74K..


A01:
Cutting Tool for shortening plastic fiber optic

WebDescription:
Cutting Tool for shortening plastic fiber optic


WebDescription:
floating magnet, free, for use with BIL...-...A-, 10x10


WebDescription:
floating magnet, free, for use with BIL...-...A-, 26x14x14


M07:
Hexagon socket head cup screw DIN 912 M5x10-A2 (St


A01:
Connector, straight, 3-pins, without LED

WebDescription:
Connector, straight, 3-pins, without LED, PNP-NO


A02:
on Sensors with connection S4 (DC, NO, M12)

WebDescription:
Connector, straight, 3-pins on Sensors with connection S4 (DC, NO, M12), with out LED


WebDescription:
Connector, straight, 3-pins on Sensors with connection S4 (DC, NO, M12), temp. 120°C


A02:
on Sensors with connection S4 (PNP-NO, M12)

WebDescription:
Connector, straight, 3-pins, LED, PNP-NO


A02:
on Sensors with connection S4 (DC, PNP-NO, M12)

WebDescription:
Connector, angle,  3-pins, with LED, PNP-NO


A02:
on Sensors with connection S4 (DC, PNP-NO/NC, M12)

WebDescription:
Connector, angle,  4-pins, with LED, PNP-NO/NC


A01:
Mounting Bracket provides to fastening sensores BES R01

S01:
consisting of:
2 cheese-head screws DIN 912 M3x12
2 spacers Ø5 x Ø3,3x3,7
1 angled screwdriver DIN 911 SW 2,5


A02:
Reducing sleeve for sensors with Ø10 mm for installing in clamps with Ø12 mm.


A02:
on Sensors with connection S26 (DC, NO, M5)

WebDescription:
Connector, straight, 3-pins on Sensors with connection S26 (DC, NO, M5)


A02:
on Sensors with connection S26 (DC, NO/NC, M5)

WebDescription:
Connector, straight, 4-pins on Sensors with connection S26 (DC, NO/NC, M5)


WebDescription:
Connector, angle, 3-pins on Sensors with connection S26 (DC, NO, M5)


WebDescription:
Connector, angle, 4-pins on Sensors with connection S26 (DC, NO/NC, M5)


A02:
on Sensors with connection S4 (NO / NC, M8)

WebDescription:
Connector, straight, 3-pins, with out LED, NO or NC


A01:
Connection cable, straight, 3-pins, NO or NC

WebDescription:
Connection cable, straight, 3-pins, with out LED, NO or NC, on Sensors with connection S49 (NC, M8)


WebDescription:
Connector, angle, 3-pins, with out LED, NO or NC


A02:
on Sensors with connection S49(DC, NC or NO, M8)

WebDescription:
Connector cable , straight, 3-pin on Sensors with connection S49(DC, NC or NO, M8)


A02:
on Sensors with connection S4 (PNP, NO / NC, M8)

WebDescription:
Connector, angle, 3-pins, with LED, PNP, NO or NC


WebDescription:
Connector, right angle, 5-pin on Sensors with connection S1


WebDescription:
Connector, straight, 4-pin on Sensors with connection S4(DC, M12)


A02:
on Sensors with connection S4(DC, PNP, M12)

WebDescription:
Connector, straight, 4-pin on Sensors with connection S4(DC, PNP, M12)


A02:
on Sensors with connection S4(DC, NPN, M12)

WebDescription:
Connector, straight, 4-pin on Sensors with connection S4(DC, NPN, M12)


A02:
on Sensors with connection S4 (DC, PNP, n.o., M12)

WebDescription:
Connector, straight, 3-pin on Sensors with connection S4 (DC, PNP, n.o., M12)


WebDescription:
Connector, straight, 2-pins, non-polarized, NO, with out LED


WebDescription:
Connector, straight, 2-pins, NC, with out LED


WebDescription:
Connector, straight, polarized, 2-pins, NO, with out LED


WebDescription:
Connector, straight,  4-pin, NO, shielded for Analogsensor BOD 26


A01:
Connector, 3-pins, straight, without LED

WebDescription:
Connector 3-pins, straight, NO, without LED


A02:
on Sensors with connection S4 (DC, Antivalent, M12)

WebDescription:
Connector, straight, 4-pin on Sensors with connection S4 (DC, Antivalent, M12)


WebDescription:
Connector 4-pins, straight, NO / NC, without LED


WebDescription:
Connector, straight, 3-pin on Sensors with connection S4 (DC, PNP, n.o., M12), 2 LED


A02:
on Sensors with connection S4 (DC, NPN, n.o., M12)

WebDescription:
Connector, straight, 3-pin on Sensors with connection S4 (DC, NPN, n.o., M12), 2 LED


A02:
on Sensors with connection S4 (DC, PNP, Antivalent, M12)

WebDescription:
Connector, straight, 4-pin on Sensors with connection S4 (DC, PNP, Antivalent, M12), 2 LED


WebDescription:
on Sensors with connection S4 (DC, PNP, Antivalent, M12), 2 LED


A02:
on Sensors with connection S4 (DC, NPN, NO / NC, M12)

WebDescription:
Connector, straight, 4-pin on Sensors with connection S4 (DC, NPN, NO / NC, M12), 2 LED


A01:
Connector, right angle, 3-pin, without LED

A02:
on Sensors with connection S4 (DC, n.o., M12)

WebDescription:
Connector, right angle, 3-pin on Sensors with connection S4 (DC, n.o., M12), without LED


WebDescription:
Connector, right angle, 4-pin on Sensors with connection S4 (DC, PNP, Antivalent, M12)


A02:
on Sensors with connection S4 (DC 2-wire, n.o., M12)

WebDescription:
Connector, right angle, 2-pin on Sensors with connection S4 (DC 2- wire, n.o., M12)


WebDescription:
Connector, right angle, 2-pin on Sensors with connection S4 (DC 2-wire, n.o., M12)


A02:
on Sensors with connection S4 (DC 2-wire, n.c., M12)

WebDescription:
Connector, right angle, 2-pin on Sensors with connection S4 (DC 2-wire, n.c., M12)


A02:
on Sensors with connection S4 (DC 2-wire, n.o., polarized, M12)

WebDescription:
Connector, right angle, 2-pin on Sensors with connection S4 (DC 2-wire, n.o., polarized, M12)


WebDescription:
Connector, right angle, 3-pin on Sensors with connection S4 (DC, n.o., M12)


A02:
on Sensors with connection S4 (DC, n.c., M12)

WebDescription:
Connector, right angle, 3-pin on Sensors with connection S4 (DC, n.c., M12), without LED


A01:
Connector, right angle, 4-pin, without LED

A02:
on Sensors with connection S4 (DC,Antivalent, M12)

WebDescription:
Connector, right angle, 4-pin on Sensors with connection S4 (DC, Antivalent, M12), without LED


WebDescription:
Connector, straight/angle, 4-pins with sensors S4 (DC, n.o.-n.c., M12)


A02:
on Sensors with S4 Connector (M12, DC, PNP, NO)

WebDescription:
Connector, right angle, 3-pin, with 2 LED, on Sensors with connection S4 (DC, PNP, n.o., M12)


WebDescription:
Connector, right angle, 3-pin, NO, PNP, with LED


A01:
Connector, right angle, 3 pin, 2 LED PU-Cable

WebDescription:
Connector, right angle, 3 pin,2 LED PU-Cable on Sensors with connection S4 (DC, PNP, n.o., M12)


A02:
on Sensors with connection S4 (DC, PNP, n.c., M12)

WebDescription:
Connector, right angle, 3-pin on Sensors with connection S4 (DC, PNP, n.c., M12), 2 LED


WebDescription:
Connector, right angle, 3-pin on Sensors with connection S4 (DC, NPN, n.o., M12), 2 LED


A02:
on Sensors with connection S4 (DC, NPN, n.c., M12)

WebDescription:
Connector, right angle, 3-pin on Sensors with connection S4 (DC, NPN, n.c., M12), 2 LED


WebDescription:
Connector, right angle, 4-pin on Sensors with connection S4 (DC, PNP, Antivalent, M12), 2 LED


A02:
on Sensors with connection S4 (DC, NPN, Antivalent, M12)

WebDescription:
Connector, right angle, 4-pin on Sensors with connection S4 (DC, NPN, Antivalent, M12), 2 LED


A01:
Connector, stainless steelnut, right angle, 4-pin, 3 LED

A02:
on Sensors with connection S4 (DC, PNP, NO/NC, M12)

WebDescription:
Connector, stainless steel, right angle, 4-pin on Sensors with connection S4 (DC, PNP, NO/NC, M12), 3 LED


A01:
Connector, stainless steel nut, right angle, 3 pin, 2 LED

WebDescription:
Connector, stainless steel, right angle, 3-pin. on Sensors with connection S4 (DC,PNP, n.o., M12), 2 LED


A01:
Connector, stainless steel nut, right angle, 4-pin, 2 LED

WebDescription:
Connector, stainless steel, right angle, 4-pin on Sensors with connection S4 (DC, PNP, NO/NC, M12), 2 LED


A02:
on Sensors with connection S21 (AC/DC, 1/2"")

WebDescription:
"Connector, straight, 3-pin on Sensors with connection S21(AC/DC, 1/2"")"


WebDescription:
"Connector, right angle, 3-pin on Sensors with connection S21 (AC/DC, 1/2"")"


WebDescription:
Connector, straight, 3-pin on Sensors with connection S4 (DC, NO, M12)


A02:
on Sensors with connection S4 (DC, NO/NC, M12)

WebDescription:
Connector, straight, 4-pin on Sensors with connection S4 (DC, NO/NC, M12)


WebDescription:
Connector, right angle, 4-pin on Sensors with connection S4 (DC, NO/NC, M12)


A02:
on Sensors with connection S27 (AC/DC, M12)

WebDescription:
Connector, straight, 3-pin on Sensors with connection S27 (AC/DC, M12)


WebDescription:
Connector, right angle, 3-pin on Sensors with connection S27 (AC/DC, M12)


A01:
Connector, stainless steel, right angle, 4-pin

WebDescription:
Connector, stainless steel, right angle, 4-pin on Sensors with connection S27(AC/DC, M12)


A02:
on Sensors with connection S49(DC, Ï8mm)

WebDescription:
Connector, angle, 3-pin on Sensors with connection S49(DC, Ï8mm)


A02:
on Sensors with connection S49(DC,PNP, Ï8mm)

WebDescription:
Connector, angle, 3-pin on Sensors with connection S49(DC,PNP, Ï8mm)


A02:
on Sensors with connection S49(DC,NPN, Ï8mm)

WebDescription:
Connector, angle, 3-pin on Sensors with connection S49(DC,NPN, Ï8mm)


WebDescription:
Connector, right angle, 3-pin on Sensors with connection S49(DC, Ï8mm)


WebDescription:
Connector, straight, 3-pin on Sensors with connection S49(DC, M8)


WebDescription:
Connector cable , straight, 3-pin on Sensors with connection S49(DC, M8)


WebDescription:
Connector, right angle, 3-pin on Sensors with connection S49(DC, M8)


A02:
on Sensors with connection S49(DC, PNP, M8)

WebDescription:
Connector, right angle, 3-pin on Sensors with connection S49(DC, PNP, M8), with LED


A02:
on Sensors with connection S49(DC, M8-M12)

WebDescription:
Connector cable , right angle, 3-pin on Sensors with connection S49 (DC,M8)


A02:
on Sensors with connection S49(DC, NPN, M8)

WebDescription:
Connector, right angle, 3-pin on Sensors with connection S49(DC, NPN, M8), with LED


A01:
Connector, stainless steel, right angle 3 pin

WebDescription:
Connector, stainless steel, right angle 3pin on Sensors with connection S49(DC, PNP, M8)


A02:
on Sensors with connection S5 (AC, 7/8"")

WebDescription:
"Connector, straight, 3-pin on Sensors with connection S5 (AC, 7/8"")"


A02:
on Sensors with connection S5 (AC, 7/8""), NO or NC

WebDescription:
"Connector, straight, 4-pin on Sensors with connection S5 (AC, 7/8""), NO or NC"


WebDescription:
Connector, right angle, 4-pin on Sensors with connection S7(DC, M18)


WebDescription:
Connector, straight, 4-pin on Sensors with connection S75(DC, M8)


A02:
4-pin, without LED, NO/NC, sceened cable

WebDescription:
Connector, right angle, 4-pin, without LED, NO/NC, sceened cable


A01:
Connection cable, right angle-straight, 3-pin

WebDescription:
Connector, right angle-straight, 3-pin, female - female, M8


WebDescription:
Connector, right angle, 4-pin on Sensors with connection S75(DC, M8)


WebDescription:
Connector, straight, 3-pin on Sensors with connection S49 (DC, NC or NO, M8)


WebDescription:
Connector, right angle, 4-pin on Sensors with connection S4(DC, M12)


WebDescription:
Connector, right angle, 3-pin on Sensors with connection S4(DC, PNP, M12)


WebDescription:
Connector, right angle, 3-pin on Sensors with connection S4(DC, NPN, M12)


A02:
on Sensors with connection S49(DC, NO or NC, M8)

WebDescription:
Connector, angle, 3-pin on Sensors with connection S49 (DC, NC or NO, M8)


WebDescription:
Connector, angle/straight, 3-pin, with sensors S49 (DC, NO/NC, M8)


A01:
Connector, straight, 4-pin, Fast connecting system, female

WebDescription:
Connector, straight, 4-pins with sensors S4 (DC, n.o.-n.c., M12)


A01:
Connector cable , straight, 3-pin, Fastconnecting system

WebDescription:
Connector cable , straight, 3-pin on Sensors with connection S49 (DC, NC or NO, M8), Fastconnecting system


A01:
Connector cable , straight, 3-pin, Fast connecting system


WebDescription:
Connector, straight, 8-pin for BFS 26K-PS-L01-S115


WebDescription:
Connector, right angle, 5-pin for BOD66M-...-S92


WebDescription:
Connector, staight, 8-pin, PU-Cable, on sensors BOD 63M


WebDescription:
Connector, angle, 3-pin on Sensors with connection S49(DC, M8)


WebDescription:
Lens for BKT and BLT for increasing range


M05:
in connection with BMF 303K-..for Pneumatic cylind

WebDescription:
in connection with BMF 303K-..for Pneumatic cylinders with C-slot e.g. SMC/Bimba


A02:
in connection with BMF 303K-..for Pneumatic cylind

WebDescription:
in connection with BMF 303K-..for Pneumatic cylinders with slot 10 e.g. Festo


WebDescription:
in connection with BMF 303K-..for Pneumatic cylinders with T-slot e.g. Festo


M07:
with hose clamp (please order separately)

WebDescription:
Bracket with BMF10E.. on pneumatic cylinder


A02:
with BMF21K... for pneumatic cylinder with tie rod Ï bis 17mm

WebDescription:
with BMF21K... for pneumatic cylinder with tie rod Ï bis 17mm


WebDescription:
Bracket with BMF21K... on pneumatic cylinder


A02:
on BMF21K... on pneumatic cylinder with tie rods Ï4.3 bis Ï6.5mm

WebDescription:
Bracket with BMF21K... on pneumatic cylinder with tie rods Ï4.3 bis Ï6.5mm


WebDescription:
in connection with BMF 303K-..for Pneumatic cylinders with C-slot Fa. SMC


WebDescription:
in connection with BMF 303K-..for Pneumatic cylinders with C-slot (Fa. Festo slot 10)


A02:
in connection with BMF for Pneumatic cylinders wit

M07:
set screw M2x3-A2 hexagon-socket offset screw

WebDescription:
in connection with BMF for Pneumatic cylinders with C-slot (e. g. Fa. Festo)


WebDescription:
in connection with BMF 303K-..for Pneumatic cylinders with T-slot (Festo, Bosch, SMC,...)


A02:
in connection with BMF 303K-.. and hose clamp for

WebDescription:
in connection with BMF 303K-.. and hose clamp for round cylinders with piston Ï8...80mm


A02:
with BMF 303-..for Pneumatic cylinders with T-slot Festo Nut-8, Bosch, SMC

WebDescription:
Bracket with BMF 303-..for Pneumatic cylinders with T-slot Festo Nut-8, Bosch, SMC


A02:
with BMF, mountable on cylinder with 60░ (e.g. Festo, Bosch, Numatics and Hoerbiger-Origa) or with 90░ (e.g. Martonair)d


A02:
Pneumatic cylinder with T-groove T-groove 5,9mm

WebDescription:
Bracket with BMF, T-groove, SMC, Nut 5,9mm


A02:
Pneumatic cylinder with circular section

M07:
set screw DIN 916 M2x3-A2,hose clamp of steinless


M07:
set screw DIN 916 M2x3-A2,hexagon socket screw DIN


WebDescription:
Bracket with BMF, without Nut, circular cylinder SMC


A02:
Pneumatic cylinder e.g. Fa. Numatics/ Norgren

M07:
set screw DIN 916 M2x5-A2/ M2x2,5-A2,allen key DIN

WebDescription:
Bracket with BMF, C- Nut, Numatics/Norgren


A02:
with BMF 305-..for Pneumatic cylinders with T-slot e.g. Festo, SMC

WebDescription:
Bracket with BMF 305-..for Pneumatic cylinders with T-slot e.g. Festo, SMC


A02:
with BMF 305-..for Pneumatic cylinders with T-slot with width >6.2mm

WebDescription:
Bracket with BMF 305-..for Pneumatic cylinders with T-slot with width >6.2mm


A01:
Bracket for BMF 305-HW-21 with BMF 21-HW-10

A05:
Used with BMF 21-HW 10 mounting bracket for all pn

WebDescription:
Used with BMF 21-HW 10 mounting bracket for all pneumatic cylinders with integrated tie rod (extrusion), extrusion width 10-17 mm.


A01:
Bracket for BMF 305-HW-21 with BMF 21-HW-8

A05:
Used with BMF 21-HW 8 mounting bracket for all com

WebDescription:
Used with BMF 21-HW 8 mounting bracket for all common pneumatic cylinders with |a 4.3-6.5 mm anchoring rod, any cylinder diameter.


A02:
on BMF 305... on pneumatic cylinder with T-Nut and width 6.7...7.5mm

WebDescription:
Bracket with BMF 305-..for Pneumatic cylinders with T-slot with width 6.7...7.5mm


A02:
with BMF 305-..for Pneumatic cylinders with T-slot with width 6.7...7.5mm


A02:
on BMF 305...and hose clamp on round pneumatic cylinders

WebDescription:
Bracket on BMF 305...and hose clamp on round pneumatic cylinders


A02:
on BMF 305...and hose clamp on pneumatic cylinder with 60░ or 90░ swallow nut

WebDescription:
Bracket with BMF 305...and hose clamp on pneumatic cylinder with 60░ or 90░ swallow nut


A02:
with BMF 305-..for Pneumatic cylinders with T-slot e.g. SMC

WebDescription:
Bracket with BMF 305-..for Pneumatic cylinders with T-slot e.g. SMC


A02:
with BMF 305-.. for Pneumatic cylinders with trapezoidal slot e.g. Bosch

WebDescription:
Bracket with BMF 305-.. for Pneumatic cylinders with trapezoidal slot e.g. Bosch


A02:
with BMF 305-..for Pneumatic cylinders with T-slot e.g. Norgren

WebDescription:
Bracket with BMF 305-..for Pneumatic cylinders with T-slot e.g. Norgren


A02:
with BMF 305-..for Pneumatic cylinders with T-slot e.g. Festo

WebDescription:
Bracket with BMF 305-..for Pneumatic cylinders with T-slot e.g. Festo Nut 8, Bosh, SMC


A02:
with BMF 305-.. for Pneumatic cylinders Mannesmann-Rexroth green series

WebDescription:
Bracket with BMF 305-.. for Pneumatic cylinders Mannesmann-Rexroth green series


A02:
on BMF 32M... on pneumatic cylinder with Trapezoid rail (Mecman)

WebDescription:
Bracket with BMF 32M... on pneumatic cylinder with Trapezoid rail (Mecman)


A02:
with BMF 32M... on pneumatic cylinder with tie rods, diameter max.11mm

WebDescription:
Bracket with BMF 32M... on pneumatic cylinder with tie rods, diameter max.11mm


A02:
with BMF 32M... on pneumatic cylinder with Trapezoid rail (Bosch)

WebDescription:
Bracket with BMF 32M... on pneumatic cylinder with Trapezoid rail (Bosch)


A02:
on BMF 32M... on pneumatic cylinder with tie rods, diameter 4...17mm

WebDescription:
Bracket on BMF 32M... on pneumatic cylinder with tie rods, diameter 4...17mm


A02:
with BMF 32M... on pneumatic cylinder with tie rod

WebDescription:
Bracket with BMF 32M... on pneumatic cylinder with tie rod


A02:
with BMF 32M... on pneumatic cylinder with trapezoidal tie rod, serie 2700, D 12-100mm, Rexroth-Mecman

WebDescription:
Bracket with BMF 32M... on pneumatic cylinder with trapezoidal tie rod, serie 2700, D 12-100mm, Rexroth-Mecman


WebDescription:
clamping cuff for Optosensors series BOS 12


WebDescription:
Slit Aperture for thru-beam series BOS 12


WebDescription:
Air Shield for Optosensors series BOS 12


WebDescription:
Protective End Cap for Optosensors series BOS 12


A02:
for Optosensors series BOS 12, for diffuse and retroflective

WebDescription:
Diagonal Mirror for Optosensors series BOS 12, for diffuse and retroflective


WebDescription:
Clamp with Ball Joint for optosensors series BOS 18


WebDescription:
Clamp 30x23x26 for optosensors series M18


WebDescription:
Double Slit Aperture for thru-beam series BOS 18


WebDescription:
Air Shield for Optosensors series BOS 18


WebDescription:
Neutral Filter 50% transmission for optosensors series BOS 18


WebDescription:
Neutral Filter 75% transmission for optosensors series BOS 18


A02:
for retroreflective sensors BOS 18M-..-1RD-..

WebDescription:
Polarizing Filter for retroreflective sensors BOS 18M-..-1RD-..


WebDescription:
Plano-Convex Lens for all BOS 18-diffuse for background suppression and small parts detection


WebDescription:
Protective End Cap for Optosensors series BOS M18


WebDescription:
Protective end cap for Optosensors series BOS 18


A02:
for diffuse, retroreflective and thru-beam series BOS 18 (except laser)

WebDescription:
90░ Rotatable Head for diffuse, retroreflective and thru-beam series BOS 18 (except laser)


WebDescription:
90° Rotatable Head for Optosensors series BOS 18


A02:
for Optosensors series BOS/BKT/BLT 21M, BOS/BOD/BFS 26K, BOS/BLE/BLS 25K, for reflector BOS R-1, Usable with BOS 18.0-KB-1,BOS 18.0-HS-1

WebDescription:
Adapter for Optosensors series BOS/BKT/BLT 21M, BOS/BOD/BFS 26K, BOS/BLE/BLS 25K, for reflector BOS R-1


WebDescription:
Mounting system for Optosensors series BOS 21M


WebDescription:
Mounting Clamp with Ball Joint for Optosensors series BOS 30


A02:
for optosensors series BOS 35, when installation on DIN-subbase not possible

WebDescription:
Mounting Bracket for optosensors series BOS 35


WebDescription:
Mounting Bracket for optosensors series BOS 36K


WebDescription:
Slit Aperture for thru-beam series BOS 65K


WebDescription:
Mounting Bracket for Optosensors series BOS 6K


WebDescription:
Mounting bracket for optosensors series BOS 74K


WebDescription:
standard reflector, round for retroflective


WebDescription:
high performance reflector, rectangular for retroflective


WebDescription:
miniature reflector, rectangular for laser retroflective


WebDescription:
miniature reflector, round for retroflective


WebDescription:
miniature reflector, round for laser retroflective


A02:
for laser sensors for normal and polarized light


WebDescription:
Reflective Tape, rectangular for retroflective


A02:
Programmable pulse or pause counter, logic inverter

WebDescription:
Signaladapter for BOS/ BES/ BCS/ ... sensors, programmable pulse or pause counter, logic inverter


A02:
Programmable pulse or pause counter, logic inverter NPN


A02:
Programmable timer for turn-on and turn-off delay

WebDescription:
Signaladapter for BOS/ BES/ BCS/ ... sensors, PNP/NPN converter, adjustable N.O./N.C. function


A02:
Programmable timer for turn-on and turn-off delay, NPN


WebDescription:
Signaladapter for BOS/ BES/ BCS/ ... sensors, Programmable timer for turn-on and turn-off delay


A02:
Programmable timer for turn-on and turn-off delay,NPN


A01:
BMF-instrument. Hex Key - Hexagonal folding handle with additional blades, 8-pcs.

M02:
Blade: Chrome-vanadium steel, through hardened, galvanic coated.Handle: Ergonomic, glass-fibre-reinforced casing, 55 mm

WebDescription:
BMF-instrument. Hex Key - Hexagonal folding handle with additional blades, 8-pcs.


A02:
stainless steel sensors with thread M12x1

WebDescription:
Nut for stainless steel sensors with thread M12x1


WebDescription:
Nut, plastic for stainless steel sensors with thread M12x1


A02:
stainless steel sensors with thread M18x1

WebDescription:
Nut for stainless steel sensors with thread M18x1


WebDescription:
Nut, plastic for stainless steel sensors with thread M18x1


A02:
stainless steel sensors with thread M30x1.5

WebDescription:
Nut for stainless steel sensors with thread M30x1.5


WebDescription:
Nut, plastic for stainless steel sensors with thread M30x1.5


A02:
stainless steel sensors with thread M5x0.5

WebDescription:
Nut for stainless steel sensors with thread M5x0.5


WebDescription:
coupling, straight, 4-pin, S4 female (DC, M12)


WebDescription:
coupling, angle, 4-pin, S4 female (DC, M12)


A02:
for mounting magnetic field sensors on round cylinders up to piston diameter 11mm

WebDescription:
hose clamp for mounting magnetic field sensors on round cylinders up to piston diameter 11mm


A02:
for mounting magnetic field sensors on round cylinders up to piston diameter 19mm

WebDescription:
hose clamp for mounting magnetic field sensors on round cylinders up to piston diameter 19mm


A02:
for mounting magnetic field sensors on round cylinders up to piston diameter 20mm

WebDescription:
hose clamp for mounting magnetic field sensors on round cylinders up to piston diameter 20mm


A02:
for mounting magnetic field sensors on round cylinders up to piston diameter 32mm

WebDescription:
for mounting magnetic field sensors on round cylinders up to piston diameter 32mm


A02:
for mounting magnetic field sensors on round cylinders up to piston diameter 40mm

WebDescription:
hose clamp for mounting magnetic field sensors on round cylinders up to piston diameter 40mm


A02:
for mounting magnetic field sensors on round cylinders up to piston diameter 50mm

WebDescription:
hose clamp for mounting magnetic field sensors on round cylinders up to piston diameter 50mm


A02:
for mounting magnetic field sensors on round cylinders up to piston diameter 69mm

WebDescription:
hose clamp for mounting magnetic field sensors on round cylinders up to piston diameter 69mm


A02:
for mounting magnetic field sensors on round cylinders up to piston diameter 80mm

WebDescription:
hose clamp for mounting magnetic field sensors on round cylinders up to piston diameter 80mm


A02:
for mounting magnetic field sensors on round cylinders up to piston diameter 79mm

WebDescription:
hose clamp for mounting magnetic field sensors on round cylinders up to piston diameter 79mm


A06:
6-flange Bracket Toolkit 0,71-2,0 mm, 5-part


A02:
The switch amplifier with relay output 2/942 serves as the interface between electrical signals from the hazardous area (Ex zone) and the non-hazardous area (safe zone).

S01:
The input signals from NAMUR sensors, mechanical contacts or optocouplers are converted through relay switching contacts on the outputs.
Input, output and auxiliary power circuits are galvanically isolated.


S01:
is an easy-to-use hand tester for PNP or NPN sensors.


A02:
The following sensors can be connected: 
BES 113-356-SA 6 normally-open 
and
BES 113-3019-SA 1 normally-closed

S01:
The test pulses and thereby the function of the proximity switch are monitored by additional electronics which signal error-free function by means of a High level on the "Status/Output" message output.


A02:
Mounting clamp with positive stop for use with M18 sensors

WebDescription:
Mounting clamp with positive stop for sensors M18


A02:
for analog signals e.c. BIL, BOD, BAW, BTL

S01:
Digital-Display for analog signals.
– Voltage 0...10 V
– Current 0...20 mA/4...20 mA


A02:
on Sensors with connection S4(DC, NO, M12)


A02:
for 2-/3-wire sensors DC PNP/NPN and analog

S01:
This programming device provides an easy way to perform the following tests and calibration on sensors:
– Programming the switching distance of a BAW inductive distance sensor
– Testing a BAW inductive distance sensor
– Testing a 3-wire BES switch
– Testing a 2-wire BES switch


A02:
for Balluff proximity sensors with PNP- or NPN Technic

M07:
Screw or snap-rail mounting for attaching to 35 mm standard rail per DIN 46277


A01:
Power supply with 2 integrated output relays and positive opening contacts


A01:
Power supply with 2 integrated output relays


A01:
Analog switching amplifier for analog current and voltage signals


A01:
Analog Switching Amplifier for direct installation, 
PNP analog and NPN NO

S01:
Then connecting the control line to the (+) side of the supply voltage enables a "Teach-in" mode, 
whereby the set distance is assigned to the signal level present and this value is stored in the device. 
This procedure is assisted by means of LED's.
During operation these LED's are used as a switching state indicator.

For sensors with a temperature output the analog temperature signal is made available in unchanged form on the device output.


A01:
Analog Switching Amplifier for direct installation, 
PNP analog and PNP NO


S01:
Protected against overload (by PTC), against reversal of plus
and minus.
Only one sensor, e.g., from series
BES 515-..., BES 516-... or BES 517-... (DC, 3-/4-wire) can be
connected, either NO or NC.
Either both or one of the outputs may be connected.


A01:
Base holder for 1 rod Ø12 mm (vertical or horizontal)


A01:
Base holder for 1 rod Ø12 mm or 10×10 mm


A01:
Sensor holder for 1 rod Ø12 mm or 10×10 mm


A02:
Bracket with positive stop for sensors M8 with thread length 40mm or longer, Stainless steel


A02:
Bracket with positive stop for sensors M8 with thread length 30mm, Stainless steel


S01:
operating distance refers to Kodak gray card 90% and BLT


WebDescription:
Steckverbinder, gerade, 4-pol. für Sensoren mit Anschlußvariante S4 (DC, Antivalent, M12)


A02:
on Sensors with connection S4 (DC, PNP-Antivalent, M12)


A02:
on Sensors with connection S4 ( DC, Antivalent, M12)

WebDescription:
Connector, straight, 4-pins on Sensors with connection S4 (DC, NO / NC, M12), with out LED


A02:
on Sensors with connection S4 (DC, NO / NC, M12)


A01:
Cross-connector for 2 rods Ø12 mm or 10×10 mm


A01:
Reflector holder for 1 rod Ø12 mm or 10×10 mm

A02:
for all reflectors with Ø20 mm (glue)
and BOS R-14 Ø51 mm (pluggable)


WebDescription:
Steckverbinder, gerade,  2-polig, Schließer, ohne LED


WebDescription:
Steckverbinder, gerade, 2-polig,Öffner, ohne LED


WebDescription:
Steckverbinder, gewinkelt, 3-pol., 2 LED, PU-Kabel für Sensoren mit Anschlußvariante S4 (DC, PNP, Schließer, M12)


WebDescription:
Steckverbinder, gewinkelt, 4-pol. für Sensoren mit Anschlußvariante S4 (DC, PNP, Antivalent, M12), 2 LED


WebDescription:
Steckverbinder, gerade, 3-pol. für Sensoren mit Anschlußvariante S49(DC, M8)


WebDescription:
Steckverbinder, gewinkelt, 3-pol. für Sensoren mit Anschlußvariante S49(DC, M8)


WebDescription:
Steckverbinder, gewinkelt, 3-pol. für Sensoren mit Anschlußvariante S49(DC, PNP, M8), mit LED


WebDescription:
Steckverbinder, gewinkelt, 3-pol. mit Sensoren mit Anschlußvariante S75(DC, M8)


# ZUBEHOER

TYPEN:
BFO 08.0-KB-1;BFO 18A-LAA-MZG-20-;BFO 18A-LAA-UZG-20-;BFO 18A-LCC-SMG-20-;BFO 18A-LCC-UZG-20-;BFO 18A-LEE-MZG-20-;BFO 18A-LEE-SMG-20-;BFO 18A-LEE-UZG-20-;BFO 18A-LFF-MZG-10-;BFO 18A-LFF-SMG-10-;BFO 18A-LGG-MZG-10-;BFO 18A-LGG-SMG-10-;BFO 18A-XAA-MZG-30-;BFO 18A-XAA-SMG-30-;BFO 18A-XAA-UZG-30-;BFO 18A-XAC-SMG-30-;BFO 18A-XAE-MZG-30-;BFO 18A-XAE-SMG-30-;BFO 18A-XAE-UZG-30-;BFO 18A-XAF-MZG-15-;BFO 18A-XAF-SMG-15-;BFO 18A-XAG-MZG-15-


TYPEN:
BFO 18V-LCC-SMG-23-;BFO 18V-LDD-SMG-23-;BFO 18V-XAC-SMG-30-;BFO 18V-XAD-SMG-30-


BEMERKUNG:
All Plastic fiberoptics BFO D22... und BFO74...


BEMERKUNG:
Additionally necessary:  BES 08-FA-49, BES 08-FA-89 or BES 12-FA-70


BEMERKUNG:
for M12 Sensors, long housing, weld immune


BEMERKUNG:
for M18 Sensors, long housing, weld immune


BEMERKUNG:
for M30 Sensors, long housing, weld immune


TYPEN:
Mutter M12x1, 1.4305;Mutter M12x1, Messing;Mutter M12x1, PA6.6


TYPEN:
Mutter M18x1, 1.4301;Mutter M18x1, Messing;Mutter M18x1, PA6.6


TYPEN:
Mutter M30x1.5, 1.4401;Mutter M30x1.5, Messing;Mutter M30x1.5, PA6.6


TYPEN:
Schlauchschelle BMF Gr.0;Schlauchschelle BMF Gr.1;Schlauchschelle BMF Gr.2;Schlauchschelle BMF Gr.3;Schlauchschelle BMF Gr.4;Schlauchschelle BMF Gr.5;Schlauchschelle BMF Gr.6;Schlauchschelle BMF Gr.7;Schlauchschelle BMF Gr.8


BEMERKUNG:
Adapter for Glasfiberoptic BFO18V... on BOS 30M


TYPEN:
BOS S-C01;BOS S-C02;BOS S-F01;BOS S-F02;BOS S-M01;BOS S-M02;BOS S-T01;BOS S-T02;BES 516-IV 2


BEMERKUNG:
only for flush mountable , zylindric Sensors


BEMERKUNG:
Reflector not for polarised Light usable


TYPEN:
BOS 5-HW-1;BOS 5-HW-2;BOS 5-HW-3;BOS 5-HW-4;BOS 5-HW-5;BOS 5-HW-6


