# FeldDef

BezLang:
Line-carried noise, induced by high-frequency fields


BezLang:
Temperature coefficient of overall system


BezLang:
Cable length [m ] at Baud rate [kBaud ] per CiA DS301


# Kombinationen

Wert:
2xPosition und 2xVelocity OV acc. DS 406


Wert:
1xPosition und 1xVelocity OV acc. DS 406


# Stammdaten

Beschreibung:
BTL in profil housing
with Analog output 4...20mA or 20...4mA

A26:
IP 67 (when BKS-S...IP 67 connector is in place)

S02:
Magnets and Connector please order separately


Beschreibung:
BTL in profil housing
with Analog output 0...20mA or 20...0mA


Beschreibung:
BTL in profil housing
with Analog output -10...+10V and +10...-10V


S01:
Resolution 0,1mV,
LED function display,
Null adjust 15%,
Span adjust 15%,
Velocity output,
Error output (relay).

S02:
48 pin card holder FormF(627164)
(please order separately)


S01:
Resolution 0,1mV/ 0,2µA,
LED function display,
Null adjust 15%,
Span adjust 15%,
Velocity output,
Error output (relay).


Beschreibung:
Digital Display 7 1/2-digits
for connecting to BTL5-S...

S01:
Digital Display for BTL3-S / BTL5-S 
with SSD-Interface

S02:
– 7 1/2-digit display with sign
– LED display 14 mm high red 7-segment
– scalable units
– variable decimal point setting
– adjustable null point
– operating voltage 10...32 V
– 2 programmable relay outputs, defined as
– limit switch/comparator
– dwell
– 2-position (on of below, off if above set value)
– 1 configurable input
– external null set
– latch display value
– isolated DIN housing for panel mount (mounting hardware included)


Beschreibung:
Digital Display 7 1/2-digits
for connecting to BTL5-P...

S01:
Digital Display for BTL2-P / BTL5-P 
with P-Schnittstelle


Beschreibung:
BTL in profil housing
with synchron serial Interface

A08:
±30µm at 1,5 and 10µm resolution or < ±2 LSB

A19:
IP 67 (with BKS-S...IP 67 connector attached)


Beschreibung:
BTL in profil housing
with digital interface pulse form P

A05:
2µm or 1 Digit depending on processing electronics


Beschreibung:
BTL in profil housing
with digital interface pulse form M


Beschreibung:
BTL in profil housing
with Analog output 0...10V and 10...0V


Beschreibung:
BTL with rod housing, 
Analog output 0...10V and 10...0V

A25:
IP 67 (when BKS-S...IP 67 connector is in place)

A27:
1.4571 stainless tube,
1.3952 stainless investment cast flange


Beschreibung:
BTL with rod housing, 
Analog output 0...20mA or 20...0mA


Beschreibung:
BTL with rod housing, 
Analog output 4...20mA or 20...4mA


Beschreibung:
BTL with rod housing, 
with digital interface pulse form P

A21:
1.4571 stainless tube,
1.3952 stainless investment cast flange


Beschreibung:
BTL with rod housing, 
with digital interface pulse form M


Beschreibung:
BTL with rod housing, 
with synchron serial Interface


Beschreibung:
BTL with short rod housing, 
Analog output 0...10V and 10...0V

A25:
IP 67 (when BKS-S32/33 is installed); IP 68, 5 bar for cable version


Beschreibung:
BTL with short rod housing, 
Analog output -10...+10V and +10...-10V


Beschreibung:
BTL with short rod housing, 
Analog output 0...20mA or 20...0mA


Beschreibung:
BTL with short rod housing, 
Analog output 4...20mA or 20...4mA


Beschreibung:
BTL with short rod housing,  
with digital interface pulse form P

A19:
IP 67 (when screwed BKS-S connector is fitted); IP 68, 5 bar for cable version

A21:
Tube stainless steel 1.4571, Flange 1.4571 or 1.4429 or 1.4404


Beschreibung:
BTL in profil housing
with CANopen Interface

A23:
IP 67 (when BKS-S...IP 67 connector is in place)


Beschreibung:
CAM-Controller with 8 Outputs
for connecting to BTL5-P...

S01:
Cam-Controller for BTL2-P / BTL5-P 
with P-Interface

S02:
– 8 programmable outputs
– 8 directional switchpoints possible
– LED display, 14 mm high red 7-segment, 6-position
– LED switchpoint status on front panel
– 300 switchpoints can be distributed over up to
15 programs
– adjustable nullpoint shift
– static and dynamic setpoints with deadtime compensation
– multiple BDD-CC 08 can be wired in parallel
– built-in transducer supply voltage 300 mA, 24 V
– isolated DIN housing for panel mount (mounting hardware included)


Beschreibung:
CAM-Controller with 8 Outputs
for connecting to BTL5-S...

S01:
Cam-Controller for BTL2-S / BTL5-S 
with SSD-Interface


Beschreibung:
BTL with rod housing
with CANopen Interface

A10:
±30µm at 1,5 and 10µm resolution or < ±2 LSB

A21:
IP 67 (with BKS-S...IP 67 connector attached)

A23:
1.4571 stainless tube,
1.3952 stainless investment cast flange


Beschreibung:
BTL in profil housing
with Profibus Interface

A24:
IP 67 (when BKS-S...IP 67 connector is in place)


Beschreibung:
BTL with rod housing, 
with Profibus Interface

A26:
1.4571 stainless tube,
1.3952 stainless investment cast flange


Beschreibung:
BTL with rod housing, 
Analog output -10...+10V und +10...-10V


Beschreibung:
BTL with short rod housing,  
with synchron serial Interface


Beschreibung:
BTL Profil A1
with digital interface pulse form P

A16:
IP 67 (with BKS-S... IP 67 connector attached)

S02:
Magnet, Clamp and Connectors please order separately


Beschreibung:
BTL Profil A1
with Analog output 0...10V and 10...0V

A20:
IP 67 (with BKS-S...IP 67 connector attached)


Beschreibung:
BTL  with rod housing,  
with 4 programmable switchpoints


Beschreibung:
Inductive Linear Position Sensor
with Analog out 0...10V


A02:
analog ±10 V programmed for 1000 mm/s,
adjustable over the range 50 mm/s...10 m/s

S01:
Resolution 16 bits
Up to 4 magnets on a single transducer can
be processed individually. Analog velocity output.
100 % programmable measuring area,
ERROR output


Beschreibung:
Processor unit
Analog 4...20mA, 20...4mA, 0...20mA, 20...0mA


Beschreibung:
BTL with short rod housing,
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
analog output  0...10V and 10...0V
axial connection
for use in Ex-Zone 0 and 1

S02:
Magnets and adapter please order separately


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
analog output 0...20mA oder 20...0mA
axial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
analog output 4...20mA oder 20...4mA
axial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
analog output  -10...+10V and +10...-10V
axial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
analog output  0...10V and 10...0V
radial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
analog output 0...20mA oder 20...0mA
radial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
analog output 4...20mA oder 20...4mA
radial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
analog output  -10...+10V and +10...-10V
radial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
with digital interface pulse form I
axial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
with digital interface pulse form P
axial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
with digital interface pulse form I
radial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
with digital interface pulse form P
radial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
with synchron serial Interface
axial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with short rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX
with synchron serial Interface
radial connection
for use in Ex-Zone 0 and 1


Beschreibung:
BTL with rod housing, Flameproof type "n", code "EEx n", Zone2
Analog output 0...10V and 10...0V

A25:
IP 67 (with BKS-S... IP 67 connector attached)

A27:
1.4571 stainless tube, 1.3952 stainless investment cast flange


Beschreibung:
BTL with rod housing, Flameproof type "n", code "EEx n", Zone2
Analog output 0...20mA oder 20...0mA


Beschreibung:
BTL with rod housing, Flameproof type "n", code "EEx n", Zone2
Analog output 4...20mA oder 20...4mA


Beschreibung:
BTL with rod housing, Flameproof type "n", code "EEx n", Zone2
Analog output -10...+10V und +10...-10V


Beschreibung:
BTL with rod housing, Flameproof type "n", code "EEx n", Zone2 
with digital Interface P

A19:
IP 67 (with BKS-S... IP 67 connector attached)

A21:
1.4571 stainless tube, 1.3952 stainless investment cast flange


Beschreibung:
BTL with rod housing, Dust protection zone 22
with digital interface pulse form P


Beschreibung:
BTL with rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX, Cenelec
analog output 0...10V und 10...0V

A36:
EEX d IIC T6
Cenelec SIRA 00A TEX1094, Eex de I & IIC, I M2, II 2 GD


Beschreibung:
BTL with rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX, Cenelec
analog output 0...20mA oder 20...0mA


Beschreibung:
BTL with rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX, Cenelec
analog output 4...20mA oder 20...4mA


Beschreibung:
BTL with rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX, Cenelec
analog output -10...+10V und +10...-10V


Beschreibung:
BTL with rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX, Cenelec
with CANopen interface


Beschreibung:
BTL with rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX, Cenelec
with digital interface pulse form I


Beschreibung:
BTL with rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX, Cenelec
with digital interface pulse form P


Beschreibung:
BTL with rod housing, 
Ex rating "d", Flameproof enclosure, Zone0, Zone1 ATEX, Cenelec
with synchron serial Interface


Beschreibung:
BTL in Bauform Stab mit kurzem Gehäuse, Zündschutzart "n" Zone2
Analogausgang 0...10V und 10...0V


Beschreibung:
BTL in Bauform Stab mit kurzem Gehäuse, Zündschutzart "n" Zone2
Analogausgang 0...20mA oder 20...0mA


Beschreibung:
BTL in Bauform Stab mit kurzem Gehäuse, Zündschutzart "n" Zone2
Analogausgang 4...20mA oder 20...4mA


Beschreibung:
BTL in Bauform Stab mit kurzem Gehäuse, Zündschutzart "n" Zone2
mit digitaler Impulsschnittstelle Impulsform P


A28:
thread M18x1,5, Flange without mounting surface


A24:
thread M18x1,5, Flange without mounting surface


A22:
thread M18x1,5, Flange without mounting surface


A27:
thread M18x1,5, Flange without mounting surface


Beschreibung:
BTL in Bauform Stab, Zündschutzart "n" Zone2
Analogausgang 0...10V und 10...0V


Beschreibung:
BTL in Bauform Stab, Zündschutzart "n" Zone2
Analogausgang 0...20mA oder 20...0mA


Beschreibung:
BTL in Bauform Stab, Zündschutzart "n" Zone2
Analogausgang 4...20mA oder 20...4mA


Beschreibung:
BTL in Bauform Stab, Zündschutzart "n" Zone2
Analogausgang -10...+10V und +10...-10V


Beschreibung:
BTL in Bauform Stab, Zündschutzart "n" Zone2
mit digitaler Impulsschnittstelle Impulsform P


Beschreibung:
Processor unit
digital TTL or PNP-Source-Driver

A01:
digital TTL 5 V DC (BTM-H1-340)
PNP-Source Driver, 24 V DC (BTM-H1-240)

A09:
digital 22 Bit parallel BCD, binär, Gray-Code,
24 Bit synchron-serial (SSI) Gray-Code

S01:
Resolution 0.01 mm, 0.025 mm, 0.1 mm, 1 mm,
BCD, binary, Gray code, null point adjustment,
Direction signal, DATA-READY, Min-Max programming,
ENABLE, DATA HOLD, bus-compatible,
ERROR output.
Replaces processing units:
BTA-D, BTA-H, BTA-P


Beschreibung:
BTL with short rod housing, axial, 
Analog output 0...10V and 10...0V


Beschreibung:
BTL with short rod housing, axial, 
Analog output 0...20mA or 20...0mA


Beschreibung:
BTL with short rod housing, axial, 
Analog output 4...20mA or 20...4mA


Beschreibung:
BTL with short rod housing, axial, 
Analog output -10...+10V and +10...-10V


Beschreibung:
BTL with short rod housing, axial,
with digital interface pulse form P


Beschreibung:
BTL with short rod housing, axial,
with synchron serial Interface


Beschreibung:
BTL with short rod housing, radial, 
Analog output 0...10V and 10...0V


Beschreibung:
BTL with short rod housing, radial, 
Analog output 0...20mA or 20...0mA


Beschreibung:
BTL with short rod housing, radial,
Analog output 4...20mA or 20...4mA


Beschreibung:
BTL with short rod housing, radial,
Analog output -10...+10V and +10...-10V


Beschreibung:
BTL with short rod housing, radial,
with digital interface pulse form P


Beschreibung:
BTL with short rod housing, radial,
with synchron serial Interface


Beschreibung:
BTL Profil A1
with Analog output -10...10V and 10...-10V

A04:
-10...+10V and +10...-10V, potential isolated


Beschreibung:
BTL Profil A1
with Analog output 0...10V and 10...0V, potential isolated

A04:
0...+10V and +10...0V, potential isolated


Beschreibung:
BTL Profil A1
with Analog output 0...10V programmable, potential isolated

A04:
0...10 V programmable, potential isolated


S01:
Resolution 16 bits
Up to 4 magnets on a single transducer can
be processed individually. 
100 % programmable measuring area,
ERROR output


S01:
Resolution 16 bits
Up to 4 magnets on a single transducer can
be processed individually.
100 % programmable measuring area,
ERROR output


Beschreibung:
Digital Display 4-digits, 
for analog Input signals

S01:
Digital Display 4-digits, 
for analog Input signals

S02:
– 4-digit
– LED display 14 mm high red 7-segment
– programmable decimal point setting
– 12 bit AC/DC converter
– selectable measurement range
– voltage input 0-10V
– current input 0/4-20 mA
– scalable display range


Beschreibung:
BTL with rod housing
with CANopen Interface, Node ID can be set by DIP switch.


Beschreibung:
BTL in profil housing
with DeviceNet-Interface


Beschreibung:
BTL in profil housing
with CANopen Interface,
Node ID can be set by DIP switch.


Beschreibung:
Inductive Linear Position Sensor
with Analog out -10...+10V


# Zubehoer

Beschreibung:
Straight connector, Solder connection max. 0.75 mm 2 (AWG 18)

Passend zu Baureihe:
PRO-A, PRO-C, PRO-I, PRO-S, STA-A-A,STA-B8-A,STA-B-A,STA-Z8-A,STA-Z-A, STA-A-I,STA-B8-I,STA-B-I,STA-Z8-I,STA-Z-I, STA-A-S,STA-B8-S,STA-B-S,STA-Z8-S,STA-Z-S, STK-A, STK-I, STK-S

Merkmale:
Straight connector
Solder connection max. 0.75 mm² (AWG 18)
Housing materia nickel plated brass
Contact CuSn
Contact surface 0.8 µm Au
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Cable Lif2Y-FC-11Y- 0 
No. of leads × cross-section/AWG 7 × 0.25mm² (AWG 24)
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Angle connector, Solder connection max. 0.75 mm 2 (AWG 18)

Passend zu Baureihe:
PRO-A, PRO-C, PRO-I, PRO-S, STA-A-A,STA-B8-A,STA-B-A,STA-Z8-A,STA-Z-A, STA-A-I,STA-B8-I,STA-B-I,STA-Z8-I,STA-Z-I, STA-A-S,STA-B8-S,STA-B-S,STA-Z8-S,STA-Z-S, STK-A, STK-I, STK-S, EX-A-a, EX-A-r, EX-I-a, EX-I-a, EX-S-a, EX-S-a

Merkmale:
Angle connector
Solder connection max. 0.75 mm² (AWG 18)
Housing materia nickel plated brass
Contact CuSn
Contact surface 0.8 µm Au
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Cable Lif2Y-FC-11Y- 0 
No. of leads × cross-section/AWG 7 × 0.25mm² (AWG 24)
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Straight connector, Crimp contacts max. 0.5 mm 2 (AWG 20)

Merkmale:
Straight connector
Crimp contacts max. 0.5 mm² (AWG 20)
Housing materia nickel plated brass
Contact CuSn
Contact surface 0.8 µm Au
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Cable Lif2Y-FC-11Y- 0 
No. of leads × cross-section/AWG 7 × 0.25mm² (AWG 24)
Enclosure rating per IEC 529 IP 67 (when fully attached)


Merkmale:
- floating magnet for profil housing
- Housing and slide surface anodized aluminium
- Weigth ca. 12g
- Traverse velocity of magnet any
- Temperature range -40...+85°C

Included:
Magnet
2 mounting screws DIN84 M4x35-A2 with washers and nuts


Beschreibung:
Floating magnet for profil housing for big distances

Merkmale:
- floating magnet for profil housing
- Housing and slide surface plastic
- Weigth ca. 40g
- Traverse velocity of magnet any
- Temperature range -40...+85°C

Included:
Magnet


Beschreibung:
Floating magnet for profil housing with e-magnet

Merkmale:
- floating magnet for profil housing
- Housing and slide surface anodized aluminium
- Weigth ca. 90g
- Traverse velocity of magnet any
- Operating voltage 24V DC
- Current draw 100mA
- Temperature range -40...+85°C

Included:
Magnet

Accessories (please order separately):
Connector straigth BKS-S19-1...
Connector right-angle BKS-S20-1-...


Beschreibung:
captive magnet for profil housing,
with thread M5

Merkmale:
- captive magnet for profil housing
- Housing anodized aluminium
- Slide surface plastic
- Weigth ca. 32g
- Traverse velocity of magnet any
- Temperature range -40...+85°C


Merkmale:
- captive magnet for profil housing
- Housing anodized aluminium
- Slide surface plastic
- Weigth ca. 35g
- Traverse velocity of magnet any
- Temperature range -40...+85°C


Beschreibung:
captive magnet for profil housing,
for use with Control arm BTL2-GS...

Merkmale:
- captive magnet for profil housing
- Housing anodized aluminium
- Slide surface plastic
- Weigth ca. 28g
- Traverse velocity of magnet any
- Temperature range -40...+85°C


Beschreibung:
Control arm for captive magnet BTL5-F-2814-1S.

Merkmale:
Control arm for captive magnet BTL5-F-2814-1S.
Material: aluminium
Weigth ca. 150g/m


Beschreibung:
Standard Magnet for Rod Housing with Diameter32

Passend zu Baureihe:
STA-A-A,STA-B8-A,STA-B-A,STA-Z8-A,STA-Z-A, STA-A-C,STA-B8-C,STA-B-C,STA-Z8-C,STA-Z-C, STA-A-I,STA-B8-I,STA-B-I,STA-Z8-I,STA-Z-I, STA-A-S,STA-B8-S,STA-B-S,STA-Z8-S,STA-Z-S, STA-A-T,STA-B8-T,STA-B-T,STA-Z8-T,STA-Z-T, STK-A, STK-I, STK-S, STA-A-P,STA-B8-P,STA-B-P,STA-Z8-P,STA-Z-P

Merkmale:
- Magnet for rod-housing
- Housing anodized aluminum
- Weight ca. 12g
- Temperature range -40...+100°C
- Traverse velocity of magnet any


Beschreibung:
Magnet for Rod Housing with Diameter32, on one side open


Beschreibung:
Magnet in float housing with Diameter 32

Merkmale:
- magnet for rod style housing
- stainless steel 1.4571, WIG-welded
- Pressure rating 24bar
- Weigth ca. 20g
- Submersion depth at H2O ca 35mm
- Temperature range -20...+120°C


Beschreibung:
Magnet in float housing with Diameter 44

Merkmale:
- magnet for rod style housing
- stainless steel 1.4571
- Pressure rating 20bar
- Weigth ca. 35g
- Submersion depth at H2O ca 31mm
- Temperature range -40...+120°C


Beschreibung:
Magnet in float housing with Diameter 44 for use in Ex-Zone 0

Passend zu Baureihe:
B-DEX-A-a, B-DEX-A-r,J-DEX-A, B-DEX-I-a, B-DEX-I-r, B-DEX-S-a, B-DEX-S-r, J-DEXC-A, J-DEXC-C, J-DEXC-I, J-DEXC-S, J-DEXC-T

Merkmale:
- magnet for rod style housing
- stainless steel 1.4571
- Pressure rating 20bar
- Weigth ca. 34g
- allowed for density up to 0,7g/ccm 
- Temperature range -40...+120°C


Beschreibung:
Magnet in float housing with Diameter 62

Merkmale:
- magnet for rod style housing
- stainless steel 1.4541
- Pressure rating 15bar
- Weigth ca. 66g
- Submersion depth at H2O ca 41mm
- Temperature range -40...+120°C


Beschreibung:
Magnet in float housing with Diameter 62 for use in Ex-Zone 0

Merkmale:
- magnet for rod style housing
- stainless steel 1.4541
- Pressure rating 15bar
- Weigth ca. 66g
- Submersion depth at 0,7g/ccm H2O ca 62mm
- Temperature range -40...+120°C


Merkmale:
PC-Software for programming BTA-S11... 

Features:
- Programming of switching points
- Creating and loading from programs
- Copying and modifying programms


Beschreibung:
Card Holder 48-pin for direct insertion per DIN 41 612 (IEC 603).

Merkmale:
Card Holder 48-pin for direct insertion per DIN 41 612 (IEC 603).
Complete with edge guides, latching levers with removal aid plus DIN-inscription on both sides.
For usage with processor units BTA... 
(Not for BTA-M...)


Beschreibung:
Adapter flange 2" / M18x1,5
for installation in a tank with 2" threaded hole

Merkmale:
Adapter flange 2" / M18x1,5
for installation in a tank with 2" threaded hole


Beschreibung:
Screw clamp for adapting the rod length to the tank height.

Merkmale:
Screw clamp for adapting the rod length to the tank height.


Beschreibung:
The spacer prevents the BTL2-S-4414... float from bottoming out beyondthe stroke area into the damping zone

Merkmale:
The spacer prevents the BTL2-S-4414... float from bottoming out beyondthe stroke area into the damping zone


Beschreibung:
Straight connector, Screw connection max. 0.75 mm 2 (AWG 18)

Merkmale:
Straight connector
Screw connection max. 0.75 mm² (AWG 18)
Housing materia nickel plated brass
Contact CuSn
Contact surface 0.8 µm Au
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Cable Lif2Y-FC-11Y- 0 
No. of leads × cross-section/AWG 7 × 0.25mm² (AWG 24)
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Angle connector, Screw connection max. 0.75 mm 2 (AWG 18)

Merkmale:
Angle connector
Screw connection max. 0.75 mm² (AWG 18)
Housing materia nickel plated brass
Contact CuSn
Contact surface 0.8 µm Au
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Cable Lif2Y-FC-11Y- 0 
No. of leads × cross-section/AWG 7 × 0.25mm² (AWG 24)
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Straight connector, male
Screw connection max. 0.75 mm²
for Micropulse with CANopen-Interface

Merkmale:
Straight connector, male
Screw connection max. 0.75 mm² (AWG 18)
Housing material nickel plated brass
Contact CuSn
Contact surface 0.8 µm Au
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Cable Lif2Y-FC-11Y- 0 
Enclosure rating per IEC 529 IP 67 (when fully attached)


Merkmale:
T-Adapter for CANopen
Housing material PA
Contact CuSn
Nut CuZn
Enclosure rating per IEC 529 IP 67 (when fully attached)
O-Ring from HBR


Merkmale:
Terminator female for CANopen
Housing material PUR
Nut CuZn with 2,5µm Ni
Contact CuSn, Au plated
Enclosure rating per IEC 529 IP 67
O-Ring from Viton
121 Ohm


Merkmale:
Terminator male for CANopen
Housing material PUR
Nut CuZn with 2,5µm Ni
Contact CuSn, Au plated
Enclosure rating per IEC 529 IP 67
O-Ring from Viton
121 Ohm


Beschreibung:
Straight connector, male
Solder connection max. 0.75 mm²

Merkmale:
Straight connector, male
Solder connection max. 0.75 mm² (AWG 18)
Housing materia nickel plated brass
Contact CuSn
Contact surface 0.8 µm Au
Cable strain relief PG 9
Min. cable diameter 6...8 mm
recommended Cable Lif2Y-FC-11Y- 0 7x0,25mm² 
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Angle connector, male
Screw connection max. 0.75 mm²
for Micropulse with CANopen-Interface

Merkmale:
Angle connector, male
Screw connection max. 0.75 mm² (AWG 18)
Housing material nickel plated brass
Contact CuSn
Contact surface 0.8 µm Au
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Cable Lif2Y-FC-11Y- 0 
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Connecting Cable male, female
PUR 5x0,34mm²
for Micropulse with CANopen-Interface
with S92-Connection

Merkmale:
Connecting Cable male, female
PUR 5x0,34mm²
Contact CuZn
Enclosure rating per IEC 529 IP 67 (when fully attached)
O-Ring from Viton
Nut CuZn with 2,5µm Ni


Beschreibung:
Straight connector, female
for Micropulse with Profibus-Interface
Screw connection max. 0.75 mm

Merkmale:
Straight connector, female
for Micropulse with Profibus-Interface
Screw connection max. 0.75 mm² (AWG 18)
Housing material nickel plated brass
Contact CuZn
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Straight connector, male
for Micropulse with Profibus-Interface
Screw connection max. 0.75 mm

Merkmale:
Straight connector, male
for Micropulse with Profibus-Interface
Screw connection max. 0.75 mm² (AWG 18)
Housing material nickel plated brass
Contact CuSn
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Connecting Cable male, female 
for Micropulse with Profibus-Interface
and S103-Connection

Merkmale:
Connecting Cable male, female
PUR 2x0,64mm²
Contact CuZn
Enclosure rating per IEC 529 IP 67 (when fully attached)
O-Ring from Viton


Merkmale:
Terminator male for Profibus
Housing material PUR
Nut CuZn
Contact CuSn
Enclosure rating per IEC 529 IP 67
O-Ring from Viton
Resistor acc. Profibus-DP


Beschreibung:
Cable for Power Supply of BTL5-T1...-S 103

Merkmale:
Connector Cable 3 pol., female
PUR 2x0,25mm²
Nut CuZn
Contact CuSn
Contact surface 0.8 µm Au
Enclosure rating per IEC 529 IP 67 (when fully attached)


Merkmale:
- Magnet for rod-housing
- Housing anodized aluminum
- Weight ca. 10g
- Temperature range -40...+100°C
- Traverse velocity of magnet any


Beschreibung:
Magnet for Rod Housing with Diameter25
Material PA 60

Merkmale:
- Magnet for rod-housing
- Housing PA 60 rainforced
- Weight ca. 10g
- Temperature range -40...+100°C
- Traverse velocity of magnet any


Beschreibung:
Standard Magnet for Rod Housing with Diameter32
Material PA 60


Beschreibung:
Magnet in float housing with Diameter 44 for use in Ex-Zone 0
Density 0,85g/cm³

Merkmale:
- magnet for rod style housing
- stainless steel 1.4571
- Pressure rating 20bar
- Weigth ca. 34g
- Temperature range -40...+120°C
- Density 0,85g/cm³


Beschreibung:
Magnet in float housing with Diameter 51

Merkmale:
- magnet for rod style housing
- stainless steel 1.4571
- Pressure rating 40bar
- Weigth ca. 34g
- Temperature range -40...+120°C
- Submersion depth at H2O ca 26mm


Beschreibung:
Magnet in float housing with Diameter 51 for use in Ex-Zone 0


Beschreibung:
Standard magnet for Series Profil A1
for compatibility with BTL5-..-P... and BTL5-P-3880 or 5500

Merkmale:
- floating magnet for profil housing A1
- Housing and slide surface plastic
- Weigth ca. 30g
- Traverse velocity of magnet any
- Temperature range -40...+85°C

Included:
Magnet

Bemerkungen:
The BTL6-A-3800-2 magnet can be operated at a distance of 4...8 mm from the top surface of the profile housing.
Together with the BTL6-A-MF01-A50 mounting clamps the mechanical installation is compatible with the BTL5-...-P-S 32 using BTL5-P-3800-2 or BTL5-P-5500-2 magnets.
This means for example that long stroke lengths or transducers with a bus interface can be interchanged without making any mechanical modifications.


Merkmale:
- floating magnet for profil housing A1
- Housing and slide surface plastic
- Weigth ca. 25g
- Traverse velocity of magnet any
- Temperature range -40...+85°C

Included:
Magnet


Beschreibung:
Mounting clamp for Series Profil A1with hole distance 50mm

Merkmale:
Mounting clamp for Series Profil A1
Material Aluminium
Hole distance 50 mm

Bemerkungen:
Together with the BTL6-A-MF01-A50 mounting clamps the mechanical installation is compatible with the BTL5-...-P-S 32 using BTL5-P-3800-2 or BTL5-P-5500-2 magnets.
This means for example that long stroke lengths or transducers with a bus interface can be interchanged without making any mechanical modifications.


Beschreibung:
Mounting clamp for Series Profil A1with hole distance 43mm

Merkmale:
Mounting clamp for Series Profil A1
Material Aluminium
Hole distance 42,7mm


Beschreibung:
Mounting cuff for Series Profil A1with hole distance 50mm

Merkmale:
Mounting cuff for Series Profil A1
Material plastic
Hole distance 50 mm


Beschreibung:
Connector with Cable for Series Profil A1, straight

Merkmale:
Connector 8-pin, female, straight
Housing material PUR
Contact CuZn
Contact surface 0.8 µm Au
Enclosure rating per IEC 529 IP 67 (when fully attached)
Knurled coupling ring CuZn
Finish 2,5µm Ni
O-ring Viton

Cable Molded-on PUR
No. of wires × conductor cross sectiont 8x0,25mm²
Type LIYY-CF11Y
Conductor configuration 14 x 0,15mm
Outer diameter 6,6 ±0,2mm
Min. bending radius dynamic 4xD, static 3xD


Beschreibung:
Connector with Cable for Series Profil A1, angle

Merkmale:
Connector 8-pin, female, angle
Housing material PUR
Contact CuZn
Contact surface 0.8 µm Au
Enclosure rating per IEC 529 IP 67 (when fully attached)
Knurled coupling ring CuZn
Finish 2,5µm Ni
O-ring Viton

Cable Molded-on PUR
No. of wires × conductor cross sectiont 8x0,25mm²
Type LIYY-CF11Y
Conductor configuration 14 x 0,15mm
Outer diameter 6,6 ±0,2mm
Min. bending radius dynamic 4xD, static 3xD


Beschreibung:
Connector Series Profil A1and BIW, straight

Merkmale:
Connector 8-pin, female, straight
Housing material CuZn
Contact CuZn
Cable strain relief PG9
Cable diameter 6...8mm
Enclosure rating per IEC 529 IP 67 (when fully attached)
O-ring Viton


Beschreibung:
Straight connector, female
for Micropulse with Profibus-Interface

Merkmale:
Straight connector, female
for Micropulse with Profibus-Interface
Housing material  PUR
Contact CuZn
No. of wires × conductor cross section 2x0,64mm²
O-Ring from Viton
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Straight connector, male
for Micropulse with Profibus-Interface

Merkmale:
Straight connector, male
for Micropulse with Profibus-Interface
Housing material  PUR
Contact CuZn
No. of wires × conductor cross section 2x0,64mm²
O-Ring from Viton
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Straight connector, female, angle
for Micropulse with Profibus-Interface
Screw connection max. 0.75 mm

Merkmale:
Straight connector, female, angle
for Micropulse with Profibus-Interface
Screw connection max. 0.75 mm² (AWG 18)
Housing material nickel plated brass
Contact CuZn
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Straight connector, male, angle
for Micropulse with Profibus-Interface
Screw connection max. 0.75 mm

Merkmale:
Straight connector, male, angle
for Micropulse with Profibus-Interface
Screw connection max. 0.75 mm² (AWG 18)
Housing material nickel plated brass
Contact CuSn
Cable strain relief PG 9
Min. cable diameter 6...8 mm
Enclosure rating per IEC 529 IP 67 (when fully attached)


Beschreibung:
Gerader Steckverbinder für Micropulse mit CANopen-Schnittstelle, Buchse

Merkmale:
Gerader Steckverbinder, Buchse
Gehäusewerkstoff PUR
Kontaktwerkstoff CuZn
Kontaktoberfläche 0,8µm Au
Leiterquerschnitt 5x0,25mm²
O-Ring aus Viton
Schutzart nach IEC 529 IP67 (im verschraubten Zustand)


Merkmale:
Gerader Steckverbinder, Stift
Gehäusewerkstoff PUR
Kontaktwerkstoff CuZn
Kontaktoberfläche 0,8µm Au
Leiterquerschnitt 5x0,25mm²
O-Ring aus Viton
Schutzart nach IEC 529 IP67 (im verschraubten Zustand)


Passend zu Baureihe:
J-DEXC-A, J-DEXC-C, J-DEXC-I, J-DEXC-S, J-DEXC-T


